 |
 |
||
HIGH STEERIPOR stocks the following quality high steer kits and parts from Trail-Gear:
Over a year in development and testing, this new knuckle design sets a new standard in Toyota knuckle strength and reliability. This kit totally eliminates the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose and shearing off the studs. The knuckle housing is also thicker than stock and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC machined, each knuckle is direct bolt on, heavy duty replacement. Six Shooter KnucklesTM are sold as a pair and include our set of special 6 hole shims for use between the top of the knuckle and the steering arm. Also included is a 1/2" coarse thread bolt to help remove the steering arms for knuckle service. To remove the steering arms, remove all 6 nuts, then install the bolt in the top of the arm. As the bolt is tightened, the steering arm is pulled up off the knuckle. Stock lower bearing plates and shims from your old knuckles are needed for knuckle assembly. A minimum of four additional steering arm studs are needed for installation. No questions asked, lifetime warranty on all knuckles, arms, rod ends and rods. Trail-Gear's six stud high steer kit includes left and right six stud steering arms, tie rod, drag link, four rod ends and your choice of flat or curved pitman arm. To use this kit on a solid axle minitruck you will also need an IFS style steering box, box mount, and four additional knuckle studs & hardware. Knuckle hardware can be found on our knuckle page Fits all Land Cruiser, 1979-1985 Toyota Pickup and 4Runner solid front axles.
Knuckle and steering arms are sold separately. In order to install all six studs, both knuckles and steering arms are required. Six Shooter Knuckle Kit, $249 High Steer Kit w/ 6 stud arms, $399 Toyota High Steer Crossover Steering Kit  Crossover Steering is critical for rock crawling. The stock steering just can't keep pace with today's super flexible suspension systems. This results in broken stock steering arms and loss of steering. Trail-Gear's high steer kit features unbeatable quality at a super low price. Kit features super beefy, solid forged steering arms, heavy duty pitman arm, heavy duty .250 wall steering rods, and rod ends. Precision fit for easy assembly. 79-95 Pickup/4Runner Kit, 4 Stud, $299 FJ40 High Steer Kit, 4 Stud, $299 FJ60 High Steer Kit, 4 Stud, $299 Toyota High Steer Arms
Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are incredibly strong. Because we make them in lots of 1,000 at a time we can offer these at a great low price! All mounting surfaces are machined including the split washer surface and the tie rod tapered holes, ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle. Fits 1979 - 1985 Toyota pickup and 4Runner. Also fits 1979 and later Land Cruisers with spring over conversion. No questions asked, lifetime warranty. Knuckle and steering arms sold separately. High Steer Arms, 6 stud, $199 pair High Steer Arms, 4 Stud $129 pair Steering Stabilizer Kit  To reduce steering vibrations at higher speeds, a steering stabilizer can be very helpful. We offer a stabilizer kit that attaches above the drag link. One end weld to the passenger side frame rail and the other end bolt onto the drag link. Eight inch stroke. Steering Stabilizer Kit, $79 each Tie Rod & Drag Link  Our heavy duty tie rods and drag links. Made from .250" wall DOM 1.25" tubing. Precision tapped. Left side thread mark. Each rod is test fitted to ensure rod ends thread in with correct fit. Powder coat black finish. 79-95 Pickup/4Runner, $59 each FJ40 Tie Rod, $59 each FJ60 Tie Rod, $59 each FJ40 Drag Link, $59 each FJ60 Drag Link, $59 each
FJ-80 Tie Rod End  Heavy duty FJ-80 tie rod ends are ideal for Toyota crossover steering applications. Includes cotter pin and jam nut.
Rod End FJ-80 Right Thread, $20 each Rod End FJ-80 Left Thread, $20 each
|
|
Aftermarket 4x4 Accessories |
|
|
©1999-2007 Iron Pig Off Road. All rights reserved. | Web design by Idea Shop Land Cruiser is a registered trademark of Toyota Motor Corporation. |
|||
.JPG)