 |
 |
||
SOLID AXLE SWAPSIPOR stocks high quality solid axle swap kits and parts from Trail-Gear:
IFS Eliminator Kit
 There are lots of choices on market for solid axle conversion. So what makes Trail-Gear kits stand out? We feature the highest quality parts, the most complete kit at the best price anywhere. Trail-Gear SAS kits include a front diff armor plate, upper axle gusset wheel bearing and knuckle service kits. Items most others charge extra for. To install your solid axle kit your going to need a rear matching lift kit, solid front axle from a 79-85 Pickup or 4Runner, and a long spline drive shaft. We offer kits in three different heights. The hangers and shackles included with each kit add one inch of lift. Thus our 3" spring kit has 4" lift and our 4" kit would be 5" of lift. Note: On V6 installations, we recommend moving the front hanger forward 3/4". This allows the tie rod to clear the stock 4wd oil pan. It also kicks the shackles forward slightly helping the springs to carry the heavier load of the V6 motor. IFS Eliminator Kit, 3" Springs, $1099 IFS Eliminator Kit, 4" Springs, $1099 IFS Eliminator Kit, 5" Springs, $1099 IFS Eliminator Kit, 5" Heavy Duty Springs, $1099 Optional: Steering arm upgrade to six stud, $70 additional 5150 shock upgrade, $40 additional Note: Now front 5" springs are available in a heavy duty version with a 25% higher spring rate. Trail-Gear has added a 7th leaf and readjusted the length of the leaves to match. If you are running a larger v6 or v8 motor you will appreciate the extra weight carrying capacity of these springs. Spring Hanger Kit  Trail-Gear's Solid Axle Hanger kit contains
Hanger kit allows of hanging of leaf springs on 1986-1995 Toyota Pickups and 4Runners. Kit designed to work with many 3" - 6" lift aftermarket springs. Frame jigs make it easy to place shackle tubes in your frame. To install, place jigs on frame under the cab body mount. Mark the frame, and cut frame tube holes with torch. Slide tubes in place and weld in. Clamp front hanger in place and weld. Bolt on springs with included bushings and shackles. Spring Hanger Kit, $150 Front Spring Hanger  This hanger is used to as a front mount for Trail-Gear 47" front leaf springs. The mount includes greasable 120mm bolts, bushings, nuts, and gussets.
Front Spring Hanger, $75
Tubes & Jigs  Frame Tubes install into IFS style frame for mounting leaf springs. Accepts stock Toyota front bushings. Jigs are used for positioning tubes in frame.
Frame Tubes, $20 Frame Tube Jigs, $20
Motor Mount Plates  These plates are used to cover the motor mount after doing a solid axle swap. Made from 1/8" steel plate, 2" X 7". Weld in place after installing solid axle conversion. Motor Mount Plates, $4 each
|
|
Aftermarket 4x4 Accessories |
|
|
©1999-2007 Iron Pig Off Road. All rights reserved. | Web design by Idea Shop Land Cruiser is a registered trademark of Toyota Motor Corporation. |
|||
.JPG)